EARTHWORK TAKEOFF SOFTWARE

Earthwork takeoff from surfaces to priced yards — in one place.

Import LandXML or DXF contours, get grid cut and fill with a cell depth map, balance shrink and swell, plan the haul, and price the dirt with real crews and equipment — inside the same estimate as your utilities and concrete.

How the earthwork takeoff works

01

Load the surfaces

Import existing and proposed surfaces as LandXML TINs or ASCII DXF contours with real elevations. Pick the contour layer if the file carries extra linework.

02

Grid the cut and fill

Both surfaces are sampled on a shared grid over their overlap. Each cell averages four corner depths, so you can see exactly where the cut and fill sit.

03

Balance the site

Apply topsoil stripping, shrink and swell. See cut used as fill, export in bank and loose yards, and import needed.

04

Plan the haul

Truck size, load and dump time, haul distance and loader output give cycle time, trucks needed and yards per day.

05

Price it with crews

Quantities flow into earthwork line items with their own labor, equipment, fuel and production rates — not a buried unit price.

06

Carry it to the bid

Earthwork stays in its own section, then rolls into the full estimate, schedule and bid export.

WORKED EXAMPLE — DEMONSTRATION, NOT A CUSTOMER PROJECT

A 3 × 3 pad at 50-ft spacing

Existing ground runs from 5102.4 down to 5100.1; the pad is set flat at 5101.5. Four 50 × 50 cells (10,000 sf) average about 0.2 ft of net cut. With 15% shrink and 25% swell, the tool shows cut used as fill, leftover export in bank and loose yards, and 185 CY of 6-inch topsoil stripping — every number traceable to the cell map.

Area

10,000 sf

Grid

50 ft

Shrink / swell

15% / 25%

Topsoil (6 in)

≈185 CY

Spreadsheet vs. standalone takeoff vs. Precision Bid Win

TaskSpreadsheetStandalone takeoffPrecision Bid Win
Surface import (LandXML / DXF)Manual re-entryYesYes
Grid cut/fill with cell depth mapHand-built formulasYesYes
Shrink, swell, topsoil balanceHand-built formulasVariesYes
Haul cycle and truck countSeparate sheetRarelyYes
Crew + equipment pricing on the same quantitySeparate sheetSeparate productYes
Same project: utilities, concrete, scheduleNoSeparate productYes

General comparison of tool categories; capabilities of specific products vary.

Questions estimators ask

What files can I use?
LandXML surfaces (TIN points and faces) and ASCII DXF contours that carry elevations. Binary DWG must be saved as DXF first.
How accurate is the grid method?
Accuracy depends on grid spacing and surface quality. Tighter spacing follows the surfaces more closely; the page shows the spacing used so you can check it.
Does it replace my surveyor's model?
No. It reads the surfaces your engineer or surveyor provides and turns them into priced bid quantities.
Is there a free trial project?
Free accounts get the full demo project. Real projects need a monthly or annual plan.

Run your next dirt bid with the founder.

Bring the surfaces from a live bid. We'll build the takeoff, haul and crew pricing with you.