Skip to content

Sitework estimating software

Miss less scope before bid day.

Sitework and excavation estimating that traces every quantity back to the drawing, so you can pressure-test assumptions before the number goes out.

20-minute founder-led walkthrough · Bring an active civil project

Sitework scope hides in general notes, details and addenda: erosion control, dewatering, haul-off, restoration. The bid that loses money is usually the one where something was never counted at all.

Scope review checks drawings against specs.

Addendum changes shown before they apply.

Cut/fill and surfaces from DXF or LandXML.

Every quantity traced to its sheet.

Scope review

A checklist that reads the documents for you

Drawing vs. spec conflicts

Mismatched pipe material, depth or compaction are flagged beside the evidence.

Addendum quantity changes

Revised sheets are compared; quantity differences wait for your Apply.

Earthwork surfaces

Import existing and proposed contours to compare cut, fill and haul.

Commonly missed items

Erosion control, traffic control, dewatering, testing and restoration prompts.

Review gate

Critical conflicts block approval until resolved.

Audit-ready export

Bid PDF and breakdowns show what was assumed and why.

Worked example (demonstration)

Catching restoration on a parking lot tie-in

Demonstration only — not a customer project. A storm line crosses an existing lot. The AI traces the pipe, and the scope review flags that the detail sheet calls for full-depth asphalt patch over the trench. The estimator adds a patch item sized from the trench run, so restoration is priced instead of discovered in the field.

Questions estimators ask

Does it handle earthwork?

Yes. Import DXF or LandXML contours for 3D cut/fill comparisons alongside the estimate.

Can I keep my own production rates?

Yes. Rates and crews are editable and saved to your private libraries.

Pricing

Plain prices. No sales call needed.

Utilities

$3,500per year

Water, sewer, storm, gas, fire and dry utilities. Or $349/month.

  • Pipe, fittings, valves and structures
  • Trench, bedding, backfill and patch
  • AI reads utility plans and profiles
  • Full utilities library included
Get started

Dirt Work

$3,500per year

Grading, excavation, import/export and paving prep. Or $349/month.

  • Cut, fill, haul and compaction
  • Subgrade, base course and erosion control
  • AI reads grading plans
  • Full dirt work library included
Get started

Concrete

$3,500per year

Site concrete, curb, gutter, sidewalk and flatwork. Or $349/month.

  • Curb, gutter, ramps and slabs
  • Forming, rebar and finishing
  • AI reads concrete details
  • Full concrete library included
Get started

Demolition

$3,500per year

Removals, sawcutting, haul-off and site clearing. Or $349/month.

  • Remove pavement, curb, structures
  • Sawcut, haul and dump fees
  • AI reads demolition notes
  • Full demolition library included
Get started

Plumbing

$3,500per year

Domestic water, waste and vent, gas, fixtures and service lines. Or $349/month.

  • Pipe, fittings, fixtures and water heaters
  • Counts checked against fixture schedules
  • AI reads plans, isometrics and risers
  • Full plumbing library included
Get started

HVAC/R

$3,500per year

Rooftop units, ductwork, air devices, refrigeration and controls. Or $349/month.

  • Equipment, duct, diffusers and line sets
  • Counts checked against equipment schedules
  • AI reads mechanical plans and schedules
  • Full hvac/r library included
Get started

Electrical

$3,500per year

Service, panels, feeders, devices, lighting and duct bank. Or $349/month.

  • Conduit, wire, devices and fixtures
  • Counts checked against panel and light schedules
  • AI reads power, lighting and one-lines
  • Full electrical library included
Get started

Free 14-day trial: one real project, 3 AI-read sheets, watermarked exports. No card needed.

Start free trial

Bundle and save: 2 trades 10% off, 3 trades 20% off, 4 or more trades 30% off. No separate library fee.

Nothing is charged until you complete checkout.

Ask about your project

Tell us what you are bidding

Send a work email and one line about the job. Jessie, the founder, replies personally. If it fits, you can book an optional 20-minute walkthrough on one of your own plan sets.

  • · No account needed to ask
  • · Founder walkthrough is optional
  • · Projects you create later stay private to your account